H-Bot


 
Model I&J2300N dispensing from a CV629 valve Model I&J2300N is a popular dispensing robot in the I&J2000 desktop robot series, with a automatic dispensing area of 11.81 x 12.60 inches (300 x 320mm). The I&J2300N industrial robot is easily programmed using a teach pendant or an optional Windows® software. The dispensing robot can accept dispensing valves and syringes with tooling loads of 11Kg and 6Kg.

Features
  • Dispense area 11.81 x 12.60 inches (300 x 320mm)
  • Repeatability 0.01mm for accurate dispensing
  • No computer skills required
  • 100 programs, 6000 points of data on each card
  • Available in three and four axis models
  • Continuous path motion for precise XYZ dispensing
  • Interpolates lines or arcs for three-dimensional dispensing
  • Teach Pendant and (optional) PC programming


 Operating Range: X-axis: 300mm
Y-axis: 320mm
Z-axis: 100mm
 Maximum Load: Worktable: 24.2lbs (11kg)
Tool: 13.20 lbs (6kg)
 Speed PTP:X & Y: Axis: 8-800 mm/sec
Z Axis: 3.2-320mm/sec
 Speed CP: X, Y, Z Combination: 0.1-800mm/sec
 Repeatability: ±0.007mm per axis
 Resolution: X & Y: Axis: 0.0050mm
Z Axis: 0.0025mm
 Data memory capacity:255 programs; 30,000 points
 Drive System:5-phase stepping motor
 Operation System:Point To Point and Continuous Path
 Interpolation:  XYZ simultaneous (CP) 3D linear interpolation
 Teaching Method:  Remote & Manual Data Input (MDI) teaching
 Controller: 50 programs, 100 steps for each program
 I/O Signals:  16 input & 16 output signals
 External Interface: RS232C - one channel for PC, one channel for the teach pendant and one channel for external equipment (optional)
 Power Supply 110V: AC 90-132V consumption 200VA
 Working Temperature:  0 - 40º C
 Relative Humidity (no condensation): 20 - 95% no condensation
 Dimensions (WxDxH) mm: 22.05 x 20.83 x 25.55
(560 x 529 x 649mm)
 Weight:  77 lbs (35 kg)
  



An innovative leader in machine vision and laser integration deploying systems using advanced sensor technologies servicing industrial automation, scientific and military partners.