Products‎ > ‎Illumination‎ > ‎Spectrum Illumination‎ > ‎

Panel


BL - Standard Series
Spectrum Illumination Standard Series Back Lights are designed to create high contrast silhouettes for Machine Vision Applications. Standard Series Back Lights can also be used to create front lighting in cases where minimal lighting is needed. All Spectrum Illumination Series Back Lights are built using Modular Board Technology (MBT). Because we use MBT we are able to make back lights in 1" (25.4mm) by 2" (50.8mm) incremental dimensions. The reason MBT is important is that when the boards are assembled in the housing, the LED spacing is the same on a single board as it is from board to board. The result of MBT is even illumination over the length and width of the light (connecting the lights together creates dead spots between lights because LED spacing is not observed). Every light is designed in a heavy duty industrial enclosure. Every Standard Series Back Light is built with 12 surface mount LED's per square inch so they produce bright even illumination. Standard Series Back Lights run on industry standard 24 volt DC power. Standard Series Back Lights also incorporate a high speed low current sourcing input for strobing the lights directly from a vision sensor or PLC output. The strobe line can be tied directly to 24 volt DC so the light remains on constant. All Standard Series Back Lights use industry standard 4 pin M12 Eurofast quick disconnect cables and are supplied with a 4 meter mating cable.

An innovative leader in machine vision and laser integration deploying systems using advanced sensor technologies servicing industrial automation, scientific and military partners.